SIP connect -> PushButton Action

[Jackson.C]

Hallo together,

i have a question about the SIP connection with Akuvox R26C
if I connect the Akuvox Intercom with SIP -> I become a PushButton Action..

can I disabled it ?

Thx

[Akuvox_Jon]

Hi Sir,

I feel so sorry that I didn't get you clearly, could you please help to clarify the problem?

And may I please know which firmware version and hardware version your R26C is working on?

"Connect the Akuvox intercom with SIP" means you registered a SIP extension on R26C right?

As for "I become a PushButon Action" means?

Many thanks.

[Jackson.C]

Hallo Jon,

my Model R26C
Firmware Version 26.31.5.8
Hardware Version 26.1.0.0.0.0.0.0
Camera Type AR0330

I´m connected with 2 SIP servers and it works very well .
my only Problem is
when the bell is pressed -> send Akuvox a Http PushButton Action to my server and the Server open a SIP connection to the Akuvox.-> when i accepting the connection on my Handy, Tablet, PC send Akuvox a new Http PushButton Action ????can I stop that?

Bildschirmfoto 2019-12-31 um 19.05.55.png

[jezikk]

Hi Jackson, I see you probably use Loxone integration with Akuvox, can you share your Akuvox (sipserver config ?) and Loxone Doorbell config ?

[Jackson.C]

Hallo jezikk,

the Config is very easy
my Router is the SIP-Server AVM7590 ...
You must make a virtual input in the config from Loxone Config
and a Http PushButton Action.. in the Akuvox for the Dorbell
thats it

[jezikk]

Hi,

1. I already have HTTP URL checked in Akuvox with link user:password@loxone_ip/dev/sps/io/....
2. I receive ping in Loxone and Door Controller starts, I have locally video preview but no audio (image and video urls: http://akuvox_ip:8080/video.cgi)
3. Host audio I set to akuvox ip address and I gave credentials to akuvox device.
4. I can open door by HTTP relay (Q1 in Loxone)

Can you post image with your Loxone config ?

[Jackson.C]

Hay a nice day

[Jackson.C]

Hallo Jon,

my Model R26C
Firmware Version 26.31.5.8
Hardware Version 26.1.0.0.0.0.0.0
Camera Type AR0330

I´m connected with 2 SIP servers and it works very well .
my only Problem is
when the bell is pressed -> send Akuvox a Http PushButton Action to my server and the Server open a SIP connection to the Akuvox.-> when i accepting the connection on my Handy, Tablet, PC send Akuvox a new Http PushButton Action ????can I stop that?
Bildschirmfoto 2019-12-31 um 19.05.55.png
Http PushButton Action

[jezikk]

Hay a nice day

Than for the pics.
I have exactly the same, except that my SIP server is outside LAN (iptel.org) and I have to pass credentials to set up a call to akuvox. And I'm stucked with it.

[Jackson.C]

Hallo Jon,

my Model R26C
Firmware Version 26.31.5.8
Hardware Version 26.1.0.0.0.0.0.0
Camera Type AR0330

I´m connected with 2 SIP servers and it works very well .
my only Problem is
when the bell is pressed -> send Akuvox a Http PushButton Action to my server and the Server open a SIP connection to the Akuvox.-> when i accepting the connection on my Handy, Tablet, PC send Akuvox a new Http PushButton Action ????can I stop that?
Bildschirmfoto 2019-12-31 um 19.05.55.png
Http PushButton Action

????